System setup
OSD (On Screen Display) Main Menu Description
Main Menu Display
MAIN MENU VER.XXXX
EXPOSURE
<-->
BLC
<-->
DAY/NIGHT
<-->
WHITE BALANCE
<-->
PRIVACY MASK
<-->
EFFECT
<-->
DISPLAY
<-->
COMMUNICATION
<-->
DEFAULT
ON
EXIT
<-->
Main Menu setup
- In order to display the setup menu on the screen, set the menu command
or press the button panel.
- Use
/
control buttons to select each item.
- Use
(-) /
(+) control buttons to change the data.
- Use MENU control button to ENTER/ EXIT the menu display.
Sub Menu Description
Exposure setup
EXPOSURE
LENS TYPE
DC/VIDEO
BRIGHTNESS
30
AGC MODE
AUTO
AGC MAX
100
AGC ADJ
NA
FLICKERLESS
OFF
SHUTTER SPD
NORMAL
DEFAULT
ON
RETURN
<-->
Note:
1. Lens type can be switched to DC/ VIDEO or MANUAL. When the system is set to DC/
VIDEO, please put the switch (situated on the back of the camera) in “DC” or “VIDEO”
position respectively according to the type of the lens used (Different lens types used
will influence the image brightness, please adjust according to actual condition.).
2. Brightness setup range: 0~36.
3. AGC MODE: AUTO/ MANUAL selectable.
(1) AGC MAX:
Set AGC MODE to AUTO (AGC MAX setup range = 0~255).
When AGC MAX < 100 is setup, AE function of
Day/ Night Mode becomes an ineffective function
(data value “---” for D/N Mode will be shown on the display).
Set to MANUAL, AGC MAX becomes an NA (Not Available) item.
(2) AGC ADJ:
Set AGC MODE to AUTO, AGC ADJ becomes an NA
(Not Available) item.
(3) AGC MODE:
Set to MANUAL, AGC ADJ can be set to fixed GAIN
value (0~255).
4. SHUTTER SPD mode (PAL: 1/120) is fixed, when FLICKERLESS mode is
set to “ON”.
5. Nine types of SHUTTER SPD Mode: AUTO, NORMAL (PAL: 1/50), 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/10000, and 1/100000.
6. AGC MODE auto switches to manual, when SHUTTER SPD is set to 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000, 1/100000 or FLICKERLESS (set to “ON”).
7. DEFAULT: Return to the factory-default configuration.
8. RETURN: Return to previous page.
BLC Setup
BLC
BLC MODE
OFF
BLC LEVEL
8
BLC AREA
CENTER
DEFAULT
ON
RETURN
<-->
Note:
1. BLC MODE: BLC MODE can be set to “ON/ OFF”.
2. BLC LEVEL (1~15): The higher the value, the higher the backlight compensation level.
3. Seven Types of BLC AREA Mode:
(1) CENTER (2) TOPS (3) TOPL (4) BOTTOMS (5) BOTTOML (6) LEFT (7) RIGHT
Day / Night setup :
DAY / NIGHT
D/N MODE
AE
DAY -> NIGHT
50
NIGHT -> DAY
200
SENSOR LEVEL
NA
FILTER DELAY
NA
DEFAULT
ON
RETURN
<-->
AE VALUE
??
SENSOR VALUE
??
Note
:
1. D/N MODE: Four types of setup (AE*/ SENSOR/ DAY/ NIGHT).
(1) AE: Setup according to DAY->NIGHT and NIGHT->DAY (threshold value), auto
switches to Color or B/ W. When AGC MAX < 100 is setup, AE function of Day/ Night
Mode becomes an ineffective function (data value “---” for D/N Mode will be shown on
the display).
(2) SENSOR: Auto switches to Color or B/ W according to SENSOR LEVEL and FILTER
DELAY setup.
(3) DAY: Fixed to Color mode.
(4) NIGHT: Fixed to B/ W mode.
2. DAY->NIGHT: The threshold value of color change (from color to B/ W) under AE mode.
Switches to B/W when “Day->Night”
“AE Value”.
3. NIGHT->DAY: The threshold value of color change (from B/ W to color) under AE mode.
Switches to Color when “Night->Day”
“AE Value”.
4. SENSOR LEVEL
(1) Higher the value: When the environment illumination is insufficient the process of
switching to B/ W will be delayed.
(2) Lower the value: When the environment illumination is insufficient advanced
switching process from Color to B/ W will quickened.
5. FILTER DELAY: The delay time of the system switching from color to B&W mode when
environment illumination change occurs (Filter Delay Time: 0~15 Sec.).
6. When D/N MODE is set to “AE/ DAY/ NIGHT” mode, SENSOR LEVEL and FILTER DELAY
become an NA (Not Available) item.
7. AE VALUE: When D/ N is set to AE, it will reflect the illumination degree of the current scene.
8. SENSOR VALUE: When D/ N is set to SENSOR, it will reflect the illumination degree of the
current scene.
White balance setup :
WHITE BALANCE
WB MODE
AUTO
RED GAIN
NA
BLUE GAIN
NA
PUSH AUTO
NA
DEFAULT
ON
RETURN
<-->
Note:
1. Five Types of WB MODE: AUTO, INDOOR, OUTDOOR, MANUAL, and PUSH AUTO.
2. RED GAIN/ BLUE GAIN operates only when WB MODE is set to MANUAL, otherwise it is
an NA (Not Available) item.
3. When WB MODE is set to PUSH AUTO:
- PUSH AUTO ON: Enable auto tracing white balance.
- PUSH AUTO OFF: Disable auto tracing white balance.
(1) CENTER
(2) TOPS
(3) TOPL
(4) BOTTOMS
(5) BOTTOML
(6) LEFT
(6) RIGHT
