![background image](http://html.mh-extra.com/html/bticino/344842/344842_user-manual_2825326058.webp)
Classe 300EOS
User manual
58
7. Touch to select the addressing mode
DHCP enabled
: automatic addressing
DHCP disabled
: manual entering of the parameters.
8. Touch to manually modify the network parameters:
IP address and network mask:
typical parameters of TCP/IP protocol networks, necessary for
the identification of the device within the local network.
Gateway
: IP address of the router/access point.
9. Touch to modify the address.
10. Touch to save it.
The parameters are entered in the three fields in the same way.
11. Touch to end.
Note
: before changing the default values, contact the network administrator. In addition to
disabling the active service, wrong values can cause malfunctioning during the communication of
other network devices.
ETHERNET
Parameters
DHCP
Automatic configuration of network parameters
IP address
Subnet mask
Gateway
Serial number
192.168.2.102
255.255.255.0
192.168.2.1
00:03:50:c0:00:33
ETHERNET
Parameters
DHCP
Automatic configuration of network parameters
IP address
Subnet mask
Gateway
Serial number
192.168.2.102
255.255.255.0
192.168.2.1
00:03:50:c0:00:33
7
8
ETHERNET
Parameters
DHCP
Automatic configuration of network parameters
IP address
Subnet mask
Gateway
Serial number
192.168.2.102
255.255.255.0
192.168.2.1
00:03:50:c0:00:33
IP ADDRESS
Tap the values that you want to edit
192 . 168 . 178 . 143
9
11
10