Classe 300EOS
User manual
45
44
Shutter with opening level adjustment
In case of system devices compatible with the preset function and if this function has been
enabled by the installer, in addition to ordering the full opening or closing of the shutter, you
will also be able to use the cursor to open/close the shutter gradually.The opening level may be
viewed through the adjustment band.
1. Touch and scroll right/left to open/close the shutter to the point required. The command is
performed when you stop pressing.
The object shows you the shutter opening status
FAVORITES
Others
Bedroom
shutter
Half open
1
1. Touch to launch a scenario.
Scenarios
This object allows you to automatically perform several actions at the same time. There are 2 types
of scenarios:
–
Default scenarios
, which allow to simultaneously control several devices in the system using a
single command directly from the App.
Example: scenario switching off the living room light and closing the kitchen blind at the same
time
–
Custom scenarios
, which only perform commands when a certain set of conditions occur
(following execute an action/start when/only if logic).
Example: scenario that at 5:15 p.m on weekdays switches on the outside light and after 1 min
30 sec also switches on the hall light.
But only if a twilight sensor indicates that it is dark outside.
A push notification will be sent once the scenario has been executed.
Contact your installer to decide what scenarios you need.
FAVORITES
Others
Night
START NOW
Scenarios
1