22
ST-00000695-
ON
1
OFF
2
2
A
1
01
0
2
2
A
B
344682
17/03/2020
EN
Classe100 X16E 2 WIRES / Wi-Fi handsfree
video internal unit with inductive loop
ICON
TYPE OF CALL
0
Selection of the call ringtone from the MAIN ENTRANCE PANEL (S=0)
1
Selection of the call ringtone from the SECONDARY ENTRANCE PANEL (S=1)
FLOOR CALL ringtone selection
INTERCOM CALL ringtone selection
EXTERNAL INTERCOM CALL ringtone selection (interface 346850 only)
ENABLE/DISABLE THE KEY SOUND
This function enables/disables the BEEP when the keys are pressed. The function is disabled by default, to enable it follow the procedure below:
From stand‑by, press and hold down the joystick for 5 seconds to
access the advanced menu and select the corresponding page
A Function status notification (ON = enabled, OFF = disabled)
1 Press the joystick to change mode
2 Move the joystick up/down to select another setting or the last
page to exit
ASSOCIATE A RINGTONE TO AN EVENT (CALL)
This page can be used to modify the ringtones associated to the different types of call.
The ringtones played for calls from EP configured with S=2 and S=3 are set by default and cannot be changed
From stand‑by, press and hold down the joystick for 5 seconds to
access the advanced menu and select the corresponding page
1 Press the joystick to associate the first event
The page shows the type of call (A) and the current ringtone number (B)
2 Move the joystick up/down to select the type of call for which you
want to set the ringtone (see the following table)