![background image](http://html1.mh-extra.com/html/bticino/2-wire-video-door-entry-and-home-video-surveillance-system/2-wire-video-door-entry-and-home-video-surveillance-system_design-and-installation-manual_2825268149.webp)
BUS
6A max (res)
Vac
ART. 346260
T= -5 +45°C
IP 30
C NC
NO/S+ S-
- TMP PL RC
SCS
1
2 PL S+ S-
346230
P
T M
BUS
6A max
(res)
Vac
M = 5
ART. 346260
T= -5 +45°C
IP 30
C NC
NO/S+ S-
- TMP PL RC
SCS
J
M
P
J
M
P
1
2 PL S+ S-
346230
P
T
J
M M
P
J
M
P
BUS
J
M
P
J
M
P
18V 4A
BUS
18V 4A
J
M
P
J
M
P
1
2 PL S+ S-
346230
P
T M
BUS
12
˜
˜
BUS
12
12 Vac - 1 A
12 Vac - 1 A
ART. 346260
T= -5 +45°C
IP 30
C NC
NO/S+ S-
- TMP PL RC
SCS
M = 5
ART. 346260
T= -5 +45°C
IP 30
C NC
NO/S+ S-
- TMP PL RC
SCS
J
M
P
J
M
P
1
2 PL S+ S-
346230
P
T
J
M M
P
J
M
P
BUS
J
M
P
J
M
P
18V 4A
BUS
18V 4A
J
M
P
J
M
P
147
2 WIRE
VIDEO
DOOR
ENTR
Y AND
HOME
VIDEO
SUR
VEILLANCE
SY
STEM
dOOr lOCK COntrOl WitH aCtUatOrs, item 346230 Or 346260
The use of actuators is indicated in the installations where you do not want to connect the electric door lock directly to the speaker module, but you
want to realize, always with only 2 wires, an inaccessible wiring from the Handset, connecting the actuator that controls the door lock in a dark area
from the ill-intentioned people.
In addition, it can be used to implement the “Door lock status control” function (with CISA ELETTRIKA door lock and accessory item 346240).
The wiring is all 2 WIRE type, including the
electric door lock power supply.
The actuator is controlled by the door lock
pushbutton of the Handsets.
The device must be configured.
In systems with 26 handsets max., the door
lock is powered using the 12~ clamps of
power supply item 346010.
The actuator is controlled by the door lock
pushbutton of the Handsets.
The device must be configured.
NOtE: in video systems the wiring must be executed in in-out
on the BuS tK clamp of the video adapter or on the IN clamp
of the audio/video node.
In case of critical electric door lock, it is
possible to use an auxiliary transformer to
supply the electric door lock. In this case, the
actuator is connected to the 2 wires system in
whichever point of the BUS, even in systems
with power supply Item 346010 (the 12 V~
conductors must not be wired).
The PL and S+ contacts can be crossed by
one maximum power of 6 A (res).
NOtE: in video systems the wiring must be executed in in-out
on the BuS tK clamp of the video adapter or on the IN clamp
of the audio/video node.
* Entrance-
hall
door lock
pushbutton
* Entrance-hall
door lock pushbutton
* Entrance-
hall door
lock
pushbutton
* Entrance-
hall door
lock
pushbutton
* Entrance-
hall
door lock
pushbutton
* Entrance-hall
door lock pushbutton
S+S- = 18 V 4 A impulsive
250 mA holding current
(max. 30 Ohm)
* the control is not timed
Auxiliary
transformer
Actuator 346230
Actuator 346260
346230
346230
346000
346000
346010
346010
346000
346010
346000
346010
346260
346260
346260
346230