37
2 WIRE
VIDEO
DOOR
ENTR
Y AND
HOME
VIDEO
SUR
VEILLANCE
SY
STEM
The layout of the electric systems
within the building entails the need
for grouping in one central point all
the active (power supplies, interfaces,
telephone switchboards, etc ) or
passive devices for the control and
the management of all the functions
This location is effectively the "brain"
of the whole home automation
system of the building Its size shall
be defined taking into account the
following general requirements:
allow for extra space for expansion
using new devices that may be
needed for future requirements
install the power supplies in the
lower position of the switchboard
in order to facilitate thermal
dissipation;
the switchboard must be capable
of dissipating a power higher than
the sum of the powers dissipated
by all the devices it will hose
BTicino offers a wide range of
switchboards suitable for types of
needs, with different capacities and
installation solutions (flush mounted,
or wall mounted)
A useful selection criteria in terms of
installation of the MY HOME system is
the following:
for
one-floor or multi-floor
installations in new or existing
(refurbished) buildings
where an
equipment room will be installed
for the electric distribution board
of the home, it is possible to select
among the various wall mounted
or flush mounted distribution
board or switchboard solutions
belonging to the Multiboard and
Selection and positioning of the
electric distribution board
Idroboard series for the integration
of the MY HOME system For
the calculation of the dissipated
power, all BTicino switchboards
and distribution boards meet
the requirements of CEI 23-51
standards
for
installation in one floor
new buildings and apartments
where an equipment room for
the integration of the MY HOME
system is not available, BTicino
offers MY HOME FLATWALL, an
innovative solution for central
installation of electric and
electronic devices and user
interfaces in full respect of the
decor of the home
This type of unit can contain up
to 288 DIN modules, and features
MY HOME Flatwall
Wall mounted and flush
mounted switchboards
sections that can only be accessed by
the installer (e g actuators and power
supplies, for maintenance/updating
purposes), as well as sections that can
be accessed by the final user (burglar-
alarm central unit, flush mounted
video handset, etc ):
MY HOME FLATWALL meets two
types of installation requirements:
inside the homes, as innovative
centralised installation solution for
all electric and multimedia services
in harmony with the decor of the
home
on the building riser, as a solution
for the distribution of the main
wiring of the whole building