English |
39
1 609 92A 3E6 • 13.1.17
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with all relevant provisions of the direc-
tives 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the
following standards: EN 60745-1, EN 60745-2-4.
Technical file (2006/42/EC) at:
BTI Befestigungstechnik GmbH & Co. KG,
Salzstraße 51
74653 Ingelfingen
GERMANY
BTI Befestigungstechnik GmbH & Co. KG,
Salzstraße 51, 74653 Ingelfingen, GERMANY
Ingelfingen, 01.11.2016
Assembly
Changing the Tool
Before any work on the machine itself, pull the
mains plug.
Wear protective gloves when changing appli-
cation tools/accessories.
Contact with the ap-
plication tool/accessory can lead to injuries.
Selecting the Application Tool/Accessory
Selecting the Application Tool/Accessory
ppa. Stephan Uder
Head of Procurement
Department
ppa. Christian Hasenest
Head of Business Unit
Construction
Accessory
UM 400
UM 550
Accessory
Material
Application
BIM segment
saw blade
Wooden materials,
Plastic,
Non-ferrous metals
Separating and plunge cuts; also for sawing
close to edges, in corners and hard to reach
areas;
example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Base plate
for sanding,
series Delta
93 mm
Depends on sanding
sheet
Sanding surfaces close to edges, in corners or
hard to reach areas;
depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, stone
Fleeces for cleaning and for texturing wood, re-
moving rust from metal and for keying varnishes,
polishing felt for pre-polishing
Profile sander Wood,
Pipes/Profile,
Paint,
Varnishes,
Filler,
Metal
Convenient, efficient sanding of profiles up to a
diameter of 55 mm;
Red sanding sheets for sanding wood,
pipes/profiles, varnishes, fillers and metal
BIM plunge
cut saw blade,
wood and
metal
Softwood,
Soft plastics,
Plasterboard,
Thin-walled
aluminium and
non-ferrous metal
profiles,
Thin sheet metals,
Non-hardened nails
and screws
Smaller separating and plunge cuts;
example: cutting an opening for sockets, flush
cutting a copper pipe, plunge cuts in plaster-
board
Filigree adjustment work in wood;
example: sawing openings for locks and fittings
OBJ_BUCH-3003-001.book Page 39 Friday, January 13, 2017 10:03 AM
