54
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
MURS-V1
Appendix A. - Troubleshooting
Symptom
Possible Cause
Solution
The radio doesn't start.
The battery is too low.
The battery isn't correctly installed.
Change or recharge the battery.
Remove the battery and reinstall it.
The battery dies quickly
The battery is dead.
The battery isn't fully charged.
Purchase a new battery.
Recharge the battery.
The LED indicates reception, but the speaker is
silent.
Volume is too low.
CTCSS or DCS enabled
Turn up the volume.
Change your CTCSS or
DCS to match those you're trying to
communicate with.
Turn CTCSS or DCS off.
Others can't hear my transmission.
Their CTCSS or DCS settings don’t match yours.
You're too far apart.
Change your CTCSS or
DCS settings to match your peers.
Move in closer.
The radio transmits without touching the PTT.
The VOX is enabled.
VOX sensitivity is too high.
Turn VOX off.
Turn down VOX sensitivity.
I can’t hear others on the same channel
Your CTCSS or DCS don’t match theirs
Change your CTCSS or DCS settings to match
theirs
Verify by pressing [M] while they are
transmitting
