36
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
MURS-V1
5.
Press the
key to confirm and save.
6.
Press the
key to exit the menu.
Channels that are in the scanning be indicated on the LCD display. Under the Memory Channel
number a small icon box will appear if it is in the scanning list. No icon under the memory
channel will be present if the channel is skipped during scanning.
Tone Scanning
Scanning for CTCSS and DCS Tones/Codes
CTCSS tone and DCS code scanning mode can be accessed with or without a signal
being present. The scanning process itself only occurs while a signal is being received.
Scanning for CTCSS Tone
1.
Press the
key to enter the menu.
2.
Enter
on your numeric keypad to come to Menu 11: R-CTCS
3.
Press the
key to select.
Insure you have a tone activated (and it is not off)
4.
Press the
to begin CTCSS scanning
A flashing "CT" will be in the left status display to indicate the radio is in CTCSS scanning mode.
In this mode, whenever the radio is receiving an RF signal on the selected MR channel, the lower
