3.0 Testing after Installation
1) Once the charger has been installed by a qualified electrician and the breaker panel has
been turned on. The display should turn on and the system should turn on.
The charger display should look like this if ordered with a user interface screen.
Fig. 21
Screen 1 Charger Available
2) If a vehicle is available, connect the EVP EVSE to the vehicle and verify that the contactor
closes
The main screen should now look like this:
This document is the
Property of Broadband Telecom Power
Inc.
and will not be copied, reproduced, or used as the basis
for sale or manufacture of apparatus without written
permission.
BTCPower EVP Series EVSE
Installation and Operations Manual
Rev C
Page 21 of 25