Fig. 12
Mount EVSE onto hold bracket.
Mount EVSE onto hold bracket as shown on Figure 12.
Secure EVSE onto hold bracket using mounting pin (included with EVSE).
Secure mounting pin fixture using 10 – 32 screw and torque down.
2.7 EV – 2001 – 00
Wall mount installation instructions
WARNING:
Failure to provide adequate structural strength for this component can result in serious
personal injury or damage to equipment! It is the installer’s responsibility to make sure the
This document is the
Property of Broadband Telecom Power
Inc.
and will not be copied, reproduced, or used as the basis
for sale or manufacture of apparatus without written
permission.
BTCPower EVP Series EVSE
Installation and Operations Manual
Rev C
Page 15 of 25