This document is a
Property of BTCPower Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
10-Dec-20
Revision
D
150kW High Power DC Charger
INSTALLATION AND USER’S MANUAL
Page
5
of
63
SAFETY GUIDELINES
1.
Safety Guidelines
SAVE THESE INSTRUCTIONS
This document contains important instructions for the installation, operation, and maintenance
of
150kW High Power DC Charger
. These instructions should be retained for future reference.
1.1.
Important Safety Instructions
DANGER
READ THIS MANUAL BEFORE YOU BEGIN
This
150kW High Power DC Charger
manages electricity and may be hazardous. The
equipment should be installed, adjusted, and serviced only by qualified electrical personnel
familiar with the construction and operation of this type of equipment and the hazards
involved, and in full compliance with all local and national codes and standards. Failure to
observe this precaution could result in severe injury or death.
Read this manual completely and become familiar with the equipment prior to performing any
procedures specified in the manual and energizing the equipment. Inspection and
maintenance of this equipment should be performed in accordance with the procedures
detailed in this manual.
In situations where it is not possible to perform an installation following the procedures stated in
this document, contact BTCPower, Inc. BTCPower, Inc. will not be responsible for any damages
that may occur resulting from custom installations that are not stated in this document.
There are no user serviceable parts inside. For service, please contact customer service or your
local distributor.
DO NOT ATTEMPT TO REPAIR THE CHARGE STATION YOURSELF. SERVICE TO THE
UNIT SHALL ONLY BE PERFORMED BY A QUALIFIED PERSONNEL.
If the charging cable is somehow damaged, do not operate the charge station. Contact your
service representative for service immediately. Shut down the power to the tower by switching
the breaker on the supply panel to the off position.
