BTBP CLARITY Mini 3D, User Manual

Page: 69 / 201

69
BrighTex Bio-Photonics, LLC
Confidential
e. Delete : Use the Delete button to delete a region on the image.
f. Undo : Undo is an option that helps the user in going back to a previous action. The user can
make five UNDO operations.
g. Redo : Redo is an option in the region verification that helps in performing the action which
has been cancelled (undo).
h. Reset : When the Reset button is selected, all the regions come to their original state i.e., all
the actions performed on the regions get cancelled.
i. Display 3 - point selection: If the generated set of automated regions is not satisfactory, then
display 3-point selection can be used to manually give user input to the system, which would take
the user selected 3-points and generate the regions based on the selected points (Refer to
section on page 46: Procedure for facial recognition for failure)
j. Up down arrows: The generated set of automated regions are grouped when displayed for
region preview the Forehead & Glabella, Crow feet & Cheek, Nasolabial and chin. The arrows can
be used to move the regions upwards/downwards/sideways as a group.
5. Edit the regions as required to fit within the panelists’ facial skin area. Be sure to avoid artifact from
coming into your regions of interest. Proceed to save by selecting “ Save Regions ”