![background image](http://html1.mh-extra.com/html/bt/ultimate-106/ultimate-106_user-manual_2824713031.webp)
Using the speed dial memory
Up to 50 names and numbers may be stored in
the system.
6
Enter this code.
The voice announces
“ R e c or d
n a m e ”
.
Speak the name to go with the number
into the handset.
After 3 seconds the voice announces
“Enter 2 digit location
and number”
(to shorten the length of the recorded
RECALL
name, press
RECALL
while recording).
01-50
Enter the 2-digit memory location under
which you want to store the number.
(Select from
01
to
50
).
KEYPAD
Enter the telephone number you want.
(It is not necessary to insert
9
for an
outside line when storing Speed Dial
numbers.)
Hang up your extension.
A maximum of 30 digits can be stored.
If 30 digits are entered, you will hear a
beep and the number is stored. Hang
up to finish.
Location 50 is reserved for a hotline
extension number.
Location 49 is reserved for the door
intercom
“Ring a telephone
n u m b e r ”
mode. This will enable visitors to be
directed to another number (stored in
29
With the BT Ringback service, when an
engaged telephone becomes free again,
you are called back.
This is a BT Network Service and is
chargeable. Please contact BT for more
details.
When you hear the engaged signal:
5
Press
5
.
Replace the receiver. When the network
rings back, all extensions will ring.
When you lift the handset, the call is
connected.
9
Enter this code from any extension.
#37#
To use the BT Ringback ser vice
To cancel a BT network Ringback
PLEASE NOTE
If you have set Answer Machine, the Ringback
will continue to ring all extensions. It will not
be answered by the Answer Machine.
To store a name and number