Safety regulations
© BT 237077-040
9
Driving and conduct while driving
• Always drive the truck from a specified operator position.
• Always drive the truck in a responsible manner and with full
control. Sudden starts and braking as well as cornering at
high speed should be avoided.
• Drive the truck at a reduced speed on inclines. Always drive
with the load uppermost on the incline. Drive straight up and
down the incline. It is
not
permitted to turn the truck on an
incline.
• Reduce the speed if the surface is slippery to prevent the
truck from sliding or overturning.
• Always drive with the forks fully lowered or as low as a load
on the support arms will allow, except when collecting or leav-
ing a load.
• Adapt your speed to the driving conditions and pay attention
to pedestrians and other trucks in the working area. Reduce
speed when the line of vision is limited.
• Pay particular attention to other personnel as well as fixed
and moving objects within the working area and thereby avoid
accidents.
• Always be prepared to stop if other personnel are in the work-
ing area.
• Keep a safe distance from all vehicles ahead.
• Always keep a safe distance from the edges of loading bays
and loading ramps. Be attentive to marked risk areas.
• Sound the horn when overtaking and when the attention of
other personnel is required.
• Always give way to a loaded truck at junctions and in confined
aisles.
•
Never
allow passengers to ride on the truck.
•
Never
drive with any part of your body outside the operator
compartment.
• Before the truck is driven on to a loading ramp ensure that the
ramp is correctly secured and has the necessary load bearing
capacity. Drive slowly and carefully across the ramp.
• When the truck is driven on to another vehicle, make sure the
vehicle is stable and that the brakes have been applied cor-
rectly.
• Before you drive the truck into a lift, ensure that the lift is
approved for the total weight of the truck, the load and the
operator. Enter with the load first. No other personnel should
be in the lift.
• When the load impairs the line of vision, always drive with the
load to the rear.
Summary of Contents for SSE135
