manualshive.com logo in svg

BT SSE135, Operator'S Manual

Share
Download
BT SSE135 Operator'S Manual Download Page 69

Maintenance

© BT 237077-040

69

• Bear in mind that the oil in the transmission or the hydraulic 

system can be hot.

WARNING!

Chemical reaction.
Prolonged skin contact with hydraulic oil can lead to skin irri-
tation.
Avoid prolonged skin contact with hydraulic oil.

WARNING!

Risk of burns.
Hot transmission and hydraulic oil.
Let the truck cool before replacing the oil.

• Only fill the hydraulic system with new and clean oil.

WARNING!

The hydraulic system can be damaged.
If the oil is contaminated hydraulic components can be dam-
aged.
Always use new and clean oil in the hydraulic system.

• Store and dispose of changed oil in accordance with local 

directives.

• Do not release solvents and the like, which are used for 

cleaning/washing, into drains that are not intended for this 
purpose. Follow the local directives that apply for disposal.

• Disconnect the battery when welding on the truck.

NOTE!

The battery can be damaged.
When welding using an electric power source the welding cur-
rent can enter the battery.
The battery should therefore be disconnected.

• Remove at least 100 mm (4”) of paint around the welding/

grinding area through sand-blasting or the use of a paint strip-
per when welding or grinding on painted surfaces.

CAUTION!

Harmful gases.
Paint that is heated gives off harmful gases.
Remove 100 mm (4”) of paint from the work area.

• When working underneath the truck, support the truck on 

trestle-blocks.

WARNING!

Risk of crushing.
A badly supported truck can fall.
Never work under a truck that is not supported on trestle-
blocks and secured by a lifting device.

Summary of Contents for SSE135



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands