Edition 5
10 March ‘99
Additional
features
18
To access your Response 130 remotely
• Dial your phone number.
• While the answering machine is playing your
outgoing message, enter your three-digit
security code. If the code is correct, the
Response 130 will beep and announce,
‘
Accepted. You have ‘X’ new messages
’ or
‘
You have no new message
s’.
• Your Response 130 will then announce the
options available to you.
The available options are as follows:
‘For menu press 1,’
‘To play new messages press 2,’
‘To set the unit on and off press 3,’
‘To play previous message press 4,’
‘To play all messages press 5,’
‘To skip message press 6,’
‘To repeat message press 7,’
‘To play outgoing message press 8,’
‘To record new outgoing message press 9, to stop
press 9 again,’
‘To erase message press 0,’
• When the option you want is announced,
press the corresponding button on the
keypad. Your Response 130 will beep and
carry out the command immediately.
• As soon as one option has been completed,
you have 8 seconds to access further options.
• If you enter
1
during or in between messages,
the unit will return to the main menu.
• Once your messages have been played back
the unit will announce,
‘
End of messages
’
.
You then have 8 seconds to choose another
menu option before the unit ends the call.
• To end your call, hang up.
To switch on your Response 130 from
another phone
If you forget to switch on your Response 130,
you can do so using a
Touchtone
™
telephone
keypad.
• Dial your telephone number to contact your
Response 130.
• After 20 rings the unit will answer the call and
play your outgoing message. You can now
either hang up, leave a message or enter
your three-digit security code to access the
other answering machine functions. At the
end of your call, the answering machine will
remain switched on.
If your Response 130’s recording memory
is full
• Dial the telephone number to which your
Response 130 is connected.
• After 20 rings the unit will announce,
‘
Hello, your call cannot be taken at the
moment, so please call later
’.
• Enter your three-digit security code to access
the options menu. You will have to delete
some of your messages if you want the
answering functions to remain on.
If you do not hear this announcement, you may
have entered an incorrect security code. Wait for a
moment and re-enter your security code.
