BT Response 130, User Manual

Page: 11 / 25

Edition 5 10 March ‘99
Using the
answering machine
9
To set the correct hour
• Press and hold the
HOUR
button. The voice
prompt will announce
‘
The hour is... ’, then
count through the hours.
• When the voice reaches the current hour
setting, release the
HOUR
button.
• The voice will announce the new hour
setting followed by,
‘
Accepted
’
.
To set the correct minutes
• Press and hold the
MINUTE
button. The
voice will announce, ‘The minute is’ , then
count through the minutes.
• When the voice reaches the current
minute setting, release the
MINUTE
button.
• The voice will announce the new setting
followed by, ‘ Accepted ’ .
Setting the day and time
Once programmed, your Response 130 can tell
you the current day and time at the touch of a
button. It will also announce the day and time
of any incoming messages and memos left on
the machine.
The buttons for setting the day and time are
located under the directory label panel.
To hear the currently set day and time
• Lift the handset to your ear and open the
panel cover.
• Press the
DAY
button. The voice will
announce the currently set time and
day, for example
‘The time and day is
Sunday 12:30am’.
To set the correct day
• Press and hold the
DAY
button. The voice
will announce ‘ The day is …’, then run
through the days of the week.
• When the voice reaches the current
day, release the
DAY
button.
• The voice will announce the new day and
time setting followed by,
‘
Accepted
’
.
• The new day is now stored.
RESET
TIME SET
HOUR
DAY MINUTE
RECORD
OUTGOING
MESSAGE
STORE NUMBER
DIAL PAUSE
CODE
DIAL B
CALL
DIVERSION
CALL
RETURN
CALL
WAITING
TIME SET
HOUR
DAY MINUTE
TIME SET
HOUR
DAY MINUTE
TIME SET
HOUR
DAY MINUTE
Hours are also shown in the display as the voice
prompt counts through them.
Minutes are also shown in the display as the voice
counts through them.
The current day and time, and the recorded outgoing
message, as well as the code setting can also be
heard through the base speaker. This is achieved by
pressing and releasing the appropriate button and
then replacing the hand set, after cover is replaced.