BT Polycom SoundStation IP 6000 Setup And User Manual Download Page 9

9

Adjusting the speaker and ringer volume

Press the 

Volume

 buttons during a call to alter the speaker volume.

Press them when the phone is idle to adjust the ringer volume.

Muting the microphone

When you turn on 

Mute

, other parties won’t be able to hear you but you will still be able  

to hear them.
1.  Press the 

Mute

 button to mute your microphone (this will also work if you’ve plugged  

in an external microphone)

2. The LED light will be red when mute is on
3. Press the 

Mute

 button again to turn off mute

If you have any problems setting up or using your SoundStation IP 6000,  
call your service desk.

999 or 112 emergency calls 

When you call 999 or 112 from a landline, the emergency services normally 
know where you’re calling from because they can see the address where 
your number is registered. But if you use your BT Cloud service at a different 
address to your registered address, they won’t know where you are.  
They’ll assume you’re at the registered address and go there.
So if your work location changes, you must tell your BT Cloud service  
administrator so they can change your registered address.

You might not be able to make 999 or 112 calls when there’s a power or network 
failure or if you’re using the service through an app on a mobile device.

Safety information

Do not open the SoundStation IP 6000 casing. This could expose you to high voltages or 
other risks. Contact your service desk if you have a problem.

Volume controls

Need help?

Things you need to know

Summary of Contents for Polycom SoundStation IP 6000












Reviews: