BT On-Air 2000 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
7
Registering your handset
C
OK
Using additional handsets
and bases
Up to six handsets can be registered and operated
from any one base (on fax machines up to four
handsets can be registered). This allows you to make
internal calls between two handsets while a third is
making an external call. Each handset can also be
registered on up to four bases.
Each additional handset you purchase must be
registered to a base.
If you are registering to a
BT On-Air 1300, 1250,
2250 or 2300
base you will need to press the
Skip button instead of the
button on the base.
At the base:-
Press
and hold
down the button on the base
until it starts to flash.
On the handset:-
Press the
UP
or
DOWN
button until the
display shows
BASE
.
Press the
OK
button.
The display will show
REGIST
.
Press the
OK
button.
The display will show
AUTO
.
Press
OK
to confirm.
To register your BT On-Air 2000 Classic
handset to a base station (if you have
not changed System Code from 0000)
▲
▼
-2-
Note
To check whether registration has been successful,
press the
GREEN PHONE
button and listen for the
dial tone. If there is no dial tone, either you have
not registered the handset correctly or the telephone
line cord is not plugged in properly.
Note
Please note that when you register a handset in the
following way any previous base that the handset
has been registered to will be deleted. To prevent
the deletion of other registered bases please register
using the process on page 8 even if you have not
changed the system code from 0000.
If you have registered your handset to more than
one base you can prioritise which base you want
your handset to use. For instructions on base
station priority, see your main On-Air user guide.
C
OK
C
OK
All manuals and user guides at all-guides.com
