1
Install organiser batteries
Main batteries
• Remove the main battery cover using a
small screwdriver or similar instrument
to release the clip.
• Insert two AAA alkaline batteries as
shown.
Back-up battery
• Pull out the plastic tab. The battery is
now connected.
• To replace the back-up battery, see
page 36.
Warning
Use only alkaline batteries in the organiser
main battery compartment. For the
organiser back-up battery, use only lithium
CR1616 batteries.
Do not try to use any power supply
connection except the one provided
otherwise you may damage your Easicom
100. It may also invalidate approval of this
apparatus.
Do not dispose of used batteries with
general household rubbish and do not burn
them.
Clean the organiser and cradle with a damp
(not wet) cloth or antistatic wipe. Never
spray cleaning fluid directly onto the
organiser or base.
6
IMPORTANT
Once installed, do not take the
main batteries and the back-up battery
out at the same time, otherwise data
will be lost.
Main batteries
Back-up
battery
Plastic tap
