3
Connect your device
to base station
To connect dongle using WPS
1
Press the WPS button on your dongle.
2
Press the WPS button on the base station within 2 minutes.
3
Wait until the WPS light stops flashing. Your computer and dongle are now
connected to the base station and ready to use.
To connect other devices manually
Note: Your base station only supports 5Ghz connections. Older devices only
supporting 2.4Ghz won’t show the base station in the list of available wireless
networks and should continue to be used with your existing wireless network.
1
Use the wireless connection software or settings on your device to display the list of
available wireless networks in your area.
2
Find your base station’s wireless network
name in the list and select it, it’s called
BTBaseStn-XXX (this can be found on
the settings card on the side of the
base station).
3
Enter your base station’s wireless key
printed on the settings card.
4
Complete the connection on your device.
To connect using ethernet cable
Connect your device to the base station’s Ethernet port using an ethernet cable.
The Ethernet light will come on.
Wi-Fi Settings
WPS
Dual-Band Wi-Fi
Dual-Band Wi-Fi
Wi-Fi Settings
WPS
1
2
3
Wi-Fi Settings
WPS
Wi-Fi Settings
WPS
