OGM1 (Answer and record) –
pre-recorded message
“Hello. Your call cannot be taken
at the moment, so please leave your
message after the tone”
.
OGM2 (Answer only) –
pre-recorded message
“Hello. Your call cannot be taken
at the moment and you cannot leave
a message, so please call later”
.
Use either of these OGMs, or if
you prefer you can record your own,
see opposite
.
OGM2 is ‘Answer only’ so your
message should not invite callers
to leave a message.
16
Using the answering machine
BT Decor 425 – Edition 2 – 13.10.03 – 5558
Selecting the OGM
1. Press
and hold
.
You will hear
“Please select outgoing message”
.
2. Press
for OGM1 (Answer and Record) or
for
OGM2 (Answer only).
The selected OGM is played back and instructions are
given on how to record a new outgoing message.
Recording your own OGM1 (Answer and Record)
Your OGM can be up to 3 minutes long.
1. Press
and hold
.
You will hear
“Please select outgoing message”
.
2. Press
to re-record OGM1 (Answer and Record)
The current OGM is played back to you.
You are then invited to record your own OGM.
3. Press
and hold
to begin recording.
4. After the beep, speak your message clearly about
15–30cm from the microphone.
5. Release
to end recording.
Your OGM is played back to you.
Skip
Skip
Skip
Ans
on off
Skip
Skip
Ans
on off
5558 BT Decor 425 UG [2] 14/10/03 4:53 PM Page 16
