Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
24
Wall mounting
Note
Before you wall-mount your Converse 2025
check that:
• you are not drilling into any hidden wiring
6
Attach the wall mount to the base by first
inserting the hook then pressing in the clips
until they lock into place.
If desk mounted, please see page 9.
7
Hang the holes on the back of the wall mount
over the screwheads and gently slide the
phone down to make sure it is securely in
place.
8
Hang the handset on the handset clip.
1
Use the template provided to mark the
positions for drilling the two holes.
2
Drill the two holes using an 8mm drill bit.
3
Insert the wall plugs if necessary then insert
the screws leaving about 8mm protruding
from the wall on which to hang the phone.
4
Connect the telephone line cords to the base
as shown in Setting Up, page 9.
5
Pull out and turn the handset catch 180° to
the wall mount position.
Wall
Wall plug
Screw
86mm
WALL
MOUNTING