4. Plug the mains power adaptor into the wall socket and
switch on.
5. Plug the telephone line cord into the wall socket.
6. Check the dial mode setting.
The
Mode
switch on the underside of your BT Converse
1300 is pre-set to
TB
for tone dialling with timed break
recall. If your phone does not work, try setting the
dialling mode to
P
or
T
.
If you are not sure which setting to use, please contact
your service provider or switchboard manager.
7. Your BT Converse 1300 has a data socket so you can
connect another product such as a modem. If required,
connect the device to the DATA port on the side of the
phone.
Your BT Converse 1300 is now ready for use.
7
Getting started
Data cable
P = Pulse dialling with earth recall.
T = Tone dialling with earth recall.
