Answer machine
If you need some help, call us on
0800 145 6789* or go to bt.com/producthelp
48
Memory full
The memory is full if there is less
than 15 seconds of recording
time left. When full, the
flashes quickly on the handset
display and the machine will
switch to Answer Only mode. If
the memory becomes full when
a caller is leaving a message,
they will hear a beep and the
call will end.
You will need to delete
messages before your answer
machine will be able to record
new ones. To delete all old
(played) messages, see page
46 and opposite.
Deleting all played messages
1. When the base isn’t in use, press and hold
Delete
to delete all your old messages. You will hear a
confirmation tone.
Remote access
With Remote access, you can listen to your answer
machine messages from another phone. You’ll need
to set a PIN. The feature will need to be switched
On
for it to work.
Setting or changing the remote access PIN
1. Press to open the menu. Press until you get
to
Answ Machine
. Press .
2. Press until you see
Answ Setting
, then press
again.
3. Use the arrow buttons again until you see
Remote
Acc.
and press .
4. Press until you get to
Change PIN
. Press .
5. Type your current PIN, press .
6. Type in your new PIN and press and then repeat
this step. Your new PIN will be saved.
Summary of Contents for BT7660
Page 67: ......
