If you need some help, call us on
0800 145 6789* or go to bt.com/producthelp
20
Switching the handset on and off
1. Press and hold until the handset turns on or off.
Making an external call
1. Press .
2. When you hear the dial tone, type the number.
When the call begins, the light on the phone’s base
will flash.
Preparatory dialling
1. This lets you type in the number first, to avoid
mistakes before the call is connected. If you make
a mistake, press to delete the last digit.
2. Press to dial.
Ending a call
Press .
Receiving a call
When you get a call, your phone will ring and the
icon will flash on the display. If you’ve got a
caller display service, the caller’s number will show
on the display. Press to answer the call.
Using the phone
If you switch the phone off and
on again, the phone will need
to be charged for some time,
before the true charge status
can be recalculated by the
phone and accurately displayed.
Call timer
Your handset will automatically
time your outgoing and
incoming calls. The handset
shows the length of time both
during and for a few seconds
after your call.
When you make a call, the In use
light on the base LED will flash.
Auto Hang-up
If auto hangup is set to On you
can end a call by placing the
handset back in the base.
If auto hang-up is set to Off,
you’ll need to press
to end
the call.
Auto hang-up On is the default
setting. See page 52.
Summary of Contents for BT7660
Page 67: ......
