![background image](http://html1.mh-extra.com/html/bt/bt3560/bt3560_user-manual_2823807005.webp)
If you need some help, call us on
0800 145 6789* or go to bt.com/producthelp
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 10 hours talk time or
120 hours standby on a single
charge. (This doesn’t mean you
can unplug the base or leave the
handset for this length of time
without charge).
Please note that new Ni-MH
rechargeable batteries don’t
reach full capacity until
they’ve been in normal use
for several days.
Battery low warning
You will hear a warning beep
every 2 minutes during a call
and the
icon will flash.
You must recharge the handset
batteries before you can use
the handset. If the charge
completely runs out the handset
will switch off. Place the
handset on the base or charger
to charge.
Set up
5
2
Charge
1. Slide off the battery cover from the back of the
handset and insert the two batteries supplied.
Note the ‘+’ and ‘-’ markings inside
the battery compartment.
Then slide the battery
cover back into place.
2. The handset will check for
a link with the base station.
Once found, you’ll need to
set the time and date, but
you can then press the
button to skip any
further options until setup is complete
(you can always set these up later).
3. Place the handset on the base and leave to charge
the batteries for
16 hours. The handset gives a
confirmation tone.
IMPORTANT
Charge the handset batteries for 16 hours before
using the handset for the first time.