If you need some help, call us on
0800 145 6789* or go to bt.com/producthelp
52
You can register up to four GAP
compliant handsets to your
BT3560 base to extend your
phone system, without needing
to install telephone extension
sockets for each new phone.
If registration isn’t successful
the first time, please try again
in case the base registration
period ran out of time.
If there are already four
handsets registered to the
base, the registration will fail.
You must de-register another
handset before you can register
the new one (see next page).
Registering an additional handset
If you bought your BT3560 as a multipack, all the
handsets that came with it will already be registered
to the base.
If you buy new handsets separately, you’ll need to
register them before you can use them. You can
register up to four handsets.
Once the registration process has started, you need
to complete it within two minutes. If you run out of
time you can start again.
At the base:
1. Press and hold
for 5 seconds until you hear a
beep. You now have 90 seconds to register a handset.
At the handset:
2. If the handset isn’t registered to a base, press
and then enter the 4 digit PIN (default is 0000) and
press
.
Or, if the handset is already registered to a base, press
and scroll
to
Advanced set and press
.
3. Press
until
Register is displayed. Press
.
Using additional handsets
