BT BT1700 Quick Setup And User Manual Download Page 18

Page: 18 / 60

If you need some help, call us on

0800 218 2182*

or go to

bt.com/producthelp

Base

Answer on/off

Press to turn the answer machine

on or off. When set to On, the text

‘On’ will light up on the button.

Skip

During playback, press

once to skip back to

the start of the current

message. Press twice to

skip back to the start of

the previous message.

Stop

Press to stop

message playback.

Skip

During playback,

press to skip forward

to the start of the

next message.

In use / Charging light

Blue light is on and flashes

when phone rings or the

handset is in use.

Play

Green light on the button flashes

when there are new messages.

Press to play messages.

Find

Press to ring all registered

handsets, helpful for finding a

missing handset, see page 22.

Also used during the registration

process, see page 49.

Volume

Decrease or increase

the speaker volume

during playback, the

call screening volume

during idle and the

base ringer volume.

Delete

Press once

to delete the

message during

playback. In idle

mode, press to

delete all old

messages.

Summary of Contents for BT1700





























































Search results

Summary of Contents for BT1700

Reviews:

Related manuals for BT1700

Brands by name

Popular brands

BT BT1700, Quick Setup And User Manual

Search results

Summary of Contents for BT1700

Reviews:

Related manuals for BT1700

Brands by name

Popular brands