BT UPS Enterprise SNMP Agent
Issued by: BT
Version no: 6.1
Date: March 2019
Page 75 of 103
8
SNMPView – Windows Based UPS Management
System
8.1
Introduction
SNMPView is a software to remotely monitor and control multiple UPS connected to a
network. When an event occurs, SNMPView can be programmed to send an email or a
pager to inform the designated network manager. It can also inform the user of the UPS
current condition or configuration, perform self-test, send a history file, turn the UPS
On/Off and more.
SNMPView features;
•
A windows interface that is simple and user friendly.
•
Automatic detection and identification of any UPS with NetAgent II or NetAgent
Mini connected to a network.
•
Capable of simultaneously monitoring up to 1,000 UPS.
•
Remotely control, monitor, and manage the networked UPS (Turn On/Off, Self-
test, etc...)
•
Able to simultaneously support both RS-232 Interface (1 or 3 phase) and Contact
Closure Interface UPS.
•
UPS condition displayed in either a graphic or analog bar chart.
•
Supports MegaTec's SNMP Agent and SNMP Internal Card.
•
Able to send email for notification
•
Able to send SMS for notification
8.2
System Requirements
•
LAN/WAN network system with TCP/IP
•
RS-232 Interface or Contact Closure Interface UPS
•
External SNMP Agent or SNMP Internal Card
•
Microsoft Windows 95, 98, NT, 2000, XP, Me, 2003,2008,Vista,7
8.3
Install SNMPView
•
Put the NetAgent Utility CD into the CD driver. And execute the SNMPView
program.
•
After installation, there will be a NetAgent group in the Windows Start group.