40
BT Studio 100 – Edition 4 – 16.10.03 – 5635
Using additional bases
On the base:
7. Press
and hold
to put the base into registration
mode.
The base beeps and the In use light flashes while the
handset is registered.
Once registered you will hear a confirmation tone and
the next available handset number is allocated and
shown in the display.
Selecting a base to use
If your handset has been registered to more than one
base you can select which one it uses.
1. Press
.
2. Press
or
until
REGISTER
is displayed then
press
.
2. Press
or
until
SELECT BASE
is displayed then
press
.
3. All bases that your handset is registered to will be
displayed, e.g.
BASE 1 2 3 4
The base that you are currently registered to will flash.
4. Enter the number of the base you want to use.
䊲
䊱
䊲
䊱
Menu
Page
If registration is unsuccessful, after
1 minute, the handset will display
the list of registered bases and you
can try again or select another
base to use.
If you are in an environment
where there is a lot of electrical
interference you may experience
difficulty registering to a base.
5635 BT Studio 100 UG [4] 21/10/03 4:08 PM Page 40