Elements Additional Handset – New Style – Edition 2 – 31.08.06 – 7780
If you experience any problems, please call the Helpline on 0870 605 8047
or email [email protected]
Safety information
•
Only use the power supply
suitable for the BT Elements
range. Using an unauthorised
power supply will invalidate your
guarantee and may damage the
telephone. The item code for the
charger mains power supply is
030989.
•
Use only the approved
rechargeable batteries supplied.
Spare rechargeable batteries are
available from the BT Elements
Helpline on 0870 605 8047.
•
Do not open the handset (except
to replace the handset batteries)
or the charger. This could expose
you to high voltages or other
risks. Contact the Helpline on
0870 605 8047 for all repairs.
•
If the keylock is switched on, it is
NOT possible to make calls,
including to the emergency
numbers (999/112).
•
Radio signal transmitted between
the handset and base may cause
interference to hearing aids.
•
It is recommended that advice
from a qualified expert be sought
before using this product in the
vicinity of emergency/intensive
care medical equipment.
•
It is recommended that if you
have a pacemaker fitted you
check with a medical expert
before using this product.
•
Your product may interfere with
other electrical equipment, e.g.
TV and radio sets, clock/alarms
and computers if placed too close.
It is recommended that you place
your product at least one metre
away from such appliances to
minimise any risk of interference.
•
Never dispose of batteries in a
fire. There is a serious risk of
explosion and/or the release of
highly toxic chemicals.
•
Never look directly at the torch
light, or shine it into the eyes.
Cleaning
•
Clean the handset and charger
with a damp (not wet) cloth, or
an anti-static wipe. Never use
household polish as this will
damage the product. Never use
a dry cloth as this may cause
a static shock.
Environmental
•
Do not expose to direct sunlight.
•
The handset may become warm
when the batteries are being
charged or during prolonged
periods of use. This is normal.
However, we recommend that to
avoid damage you do not place
the product on antique/veneered
wood.
•
Do not stand your product on
carpets or other surfaces which
generate fibres, or place it in
locations preventing the free flow
of air over its surfaces.
•
Do not submerge any part of your
product in water.
•
Do not expose your product to
fire, explosive or other hazardous
conditions.
General information
10
