Elements Additional Handset – New Style – Edition 2 – 31.08.06 – 7780
6. Enter the 4 digit PIN code of the base station you are
registering to (BT Elements base default 0000) and press
.
When the base is located, your handset will display the base ID
number, press
to confirm registration to this base or
cancel by pressing
.
The handset is automatically allocated the next available
handset number which is displayed when in standby mode.
If registration is unsuccessful, the handset will return to standby mode. Try
moving closer to the base you want to register to and following the registration
procedure again.
Wall mounting (optional)
If you wish you can wall mount the handset and charger.
IMPORTANT
Before you wall mount, please check that:
• you are not drilling into any hidden wiring or plumbing
• the mains power adaptor will reach the plug socket
BT are not responsible for any damage / injury caused while attempting to wall
mount your phone.
1. Drill two holes in the wall for the 2 screws provided using the
wall mounting bracket as a template.
2. Insert the wall plugs provided into the holes and then insert
the 2 screws, one into each hole. Leave a gap between the
head of the screw and the wall (approx 3mm).
Menu
Menu
If you experience any problems, please call the Helpline on 0870 605 8047
or email [email protected]
Getting started
5
3
50
8