manualshive.com logo in svg

BT Redcare Essential Extra, Installation Manual, Page: 21 / 41

Share
Download
BT Redcare Essential Extra Installation Manual Download Page 21

Serial connection panel type 

This menu selects the panel connection type for serial connected panels (RS232 or RS485).

Settings: 
•  None 
•  Menvier
•  Dimension GD 232 (Galaxy Dimension 48/96/264/520 (RS232 9600 8n1))
•  Dimension GD 485 (Galaxy Dimension 48/96/264/520 (RS485)) 
•  Galaxy G3 232 (G3 48/144/520 (RS232 9600 8n1)) 
•  Galaxy G3 485 (G3 48/144/520 (RS485)) 
•  Galaxy G2 485 (G212/20/44 (RS485)) 
•  Galaxy Classic 485 L (Classic 8/18/60/128 (RS485)) 
•  Galaxy Classic 485 H (Classic 500/504/512 (RS485)) 
•  Texecom 816 (Texecom 412/816/832 (RS232 19200 8n2 inv)) 
•  Texecom 48 88 (Texecom 48/88/168 Com – IP(RS232 19200 8n2 inv)) 
•  Texecom Premier(Texecom Premier Elite 48 Com-IP (RS232 19200 8n2 inv)) 
•  Bespoke Panel 
•  Pyronix (RS232 9600 8n1) (Europe only not UK)
•   Contact IP ( RS232 9600/2400/1200 8n1)
•  Panel RS232 UDL (8n1)

•  Access the configuration menu by holding Enter button for 3s. Press the Enter button again, the display 

will show ‘Pin Learn’. Press the down arrow until serial panel type is shown. Press the Enter button again to 

enter serial panel type. ‘Default status = None’ will be shown.

•  Use the down arrow to step through the available panel. Once the desired panel is reached press and hold 

the Enter button down till ‘Notice – Saved!’ is displayed.

•  Then it will return to the same position in the menu for you to select a different panel or use the down 

arrow to step through all pins to get to the Back option.

Panel Type 

None

Panel Type* 

None

Panel Type* 

Texecom Premier

Notice – 

Saved!

4

2

6

5

7

3

1

Press until shows

Press until shows

Press and hold

Press up arrow for  

5 seconds to exit

Example – changing the unit to connect to a Texecom Premier Elite panel via RS485.

Inputs

Serial Panel Type

Configuration

21

Summary of Contents for Essential Extra










































Reviews:

No comments