Example – configure Output 1 (Comms) for a single path fault
• Access the configuration menu by holding Enter button for 3s. Press the Enter button
again, the display will show ‘Pin Learn’. Press the down arrow until ‘Output Type’ is
displayed. Press the Enter button again. The display will show the default setting for
Output type 1. Use the down arrow to step through the Output types. Once the desired
output is reached press the Enter button. * will be displayed. Use down or up arrow to
change to the required configuration for that output.
• Once selected hold the Enter button down till ‘Notice – Saved!’ is displayed.
• Then it will return to the same position in the menu for you to select another output
or use the down arrow to step through all outputs to get to the Back option.
Edit mode for that part of the menu can be exited at any time, without saving changes,
by pressing for 5s. This will return you to the sub-menu that you were making
changes in.
The configuration menu can be exited at any time without saving any changes by
pressing for 5s. This will take you back to the scrolling status display.
n
n
4
2
6
5
7
3
1
Press and hold
Output Type 1
BSIA 175
Output Type 1*
Single Path Fault
Output Type 1*
BSIA 175
Notice –
Saved!
Inputs
Output Type
Configuration
19