Page | 7
The
“Minimize”
icon will shrink the live engine data display to a small bar along the bottom of the
screen. This is helpful for keeping essential data at a glance, while still being able to view the navigation
map, radio controls, etc.
Due to the smaller size of the “minimized” view, only two PIDs are able to be displayed at once in this
mode.
To cycle through the pages of minimized data display, press the drivers door lock button.
To
switch back to the engine data full page, press the
“Show Maneuver”
icon.
Another great feature of the “minimized” mode, is that this minimized data is also mirrored on the
Driver Info Center (DIC)
display in the instrument cluster, for easy/quick viewing without having to look
over at the radio/navigation screen. To view the engine data in the DIC, use the steering wheel DIC
controls to switch to the
“NAVIGATION”
page in the DIC, as shown below (non-Denali shown, Denali
instrument cluster is similar/works the same way).
NOTE: DIC data display is only available when the
“minimized” engine data view is active.
To fully hide the minimized data view on the radio/nav screen,
while still keeping the DIC data display active, press the
“Dismiss”
icon on the radio/nav screen, shown
above. Press
“Show Maneuver”
to return to the full engine data page (this will simultaneously cancel
the DIC engine data display, as explained above).
If the minimized view on the radio/nav screen has been “dismissed” or accidentally cleared, simply
press the rear defrost button 4 times to re-enter the AutoSync main menu.
View Rear Camera
– This is found on page 2 of the AutoSync main menu. Press this icon to momentarily
switch to the backup camera display. The backup camera will display for roughly 5 seconds, and then
automatically return back to the AutoSync menu.
Requires camera wiring mod or harness purchase.