Page | 12
AutoSync must be within range of your WiFi network for this to work and the AutoSync WiFi must be
configured manually. If you cannot park your truck within WiFi range, use the “offboard” update
procedure, explained in the separate AutoSync Quick-Start guide. You only have to do the AutoSync WiFi
setup (with your phone) once; the AutoSync saves your WiFi info.
The “WiFi: xxxx” button
(only visible key on engine off)
selects whether the AutoSync uses your
home/manually setup WiFi network/password credentials or the vehicle’s built in OnStar 4G LTE
hotspot. If you have a valid OnStar WiFi hotspot plan, you can press this icon and the AutoSync will then
automatically use/connect to the vehicle hotspot WiFi.
AutoSync Settings
– This is a sub-menu found on page 4 of the AutoSync main menu. This sub-menu
contains several vehicle-related setup and configuration options:
-Camera Settings. This page is to enable/disable the turn signal camera feature (automatically peek at
backup camera for a customizable duration of time when a turn signal is activated) and adjust the
associated turn signal camera settings.
-TC Lockup Config. This page is to configure the settings of the AutoSync’s built in torque converter
lockup controller. Here you can adjust the RPM, vehicle speed, and minimum gear that must be met in
order for the AutoSync to automatically command torque converter lockup. You can also configure the
lockup controller enable/disable status to save across ignition cycles here. (if you have the lockup
controller turned on/armed and shut the truck off, the lockup controller will automatically re-enable
next time you start the vehicle).
-SecurIdle. This is a feature that will lock the shifter in park
if the vehicle is running and has been locked
using the keyfob.
You can use this as a security feature if your truck is left idling, to deter driveaway
theft if someone breaks into the truck while it is idling unattended. You can use an extra keyfob, or put
your keyfob on a quick-release to lock the truck with the engine running.
NOTE: This is not fool-proof;
the AutoSync must remain plugged in for this to function. If you unplug the AutoSync with SecurIdle