6
Use only BSX authorized parts and accessories. Parts and accessories not approved for use with
the device may damage the unit.
Use only the factory specified battery with this device.
Do not use other types of battery. This may damage the unit.
Measurements outside the cuff range are inaccurate and cannot be made, and may cause the cuff
to fall off during inflation or other unpredictable events.
The
Monitor must be recharged every 6 months, otherwise the Limited warranty and the shelf life
will
end.
When the monitor exceeds its service life, sensor and electrode degradation can lead to inaccurate
measurement accuracy, or electrode looseness can lead to poor contact or other problems.
RISK OF ELECTRICAL SHOCK
Do not install or remove battery with wet hands.
CARE AND MAINTENANCE
Do not subject the monitor to strong shocks, such as dropping the
unit
on the floor.
Do not submerge the device or any of the components in water.
Store the
unit
and the components in a clean, safe location.
Changes or modification not approved by BSX will void the user warranty. Do not disassemble or
attempt to repair the
unit
or components.
Changes or modification not approved by the manufacturer will void the user warranty. Do not
disassemble or attempt to repair the
unit
or components. No modification of this equipment is allowed.
If this equipment is modified, appropriate inspection and testing must be conducted to ensure
continued safe use of the equipment.
6 BEFORE TAKING A MEASUREMENT
To ensure a reliable reading follow these recommendations:
1) Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 min prior to taking a
measurement. Rest for at least 15 min prior to taking the measurement.
2) Stress raises blood pressure, avoid taking measurements during stressful times.
3) Measurements should be taken in a quiet place.
4) Remove tight-fitting clothing from your Arm.
5) Sit on a chair with your feet flat on the floor. Rest your Arm on a table so that the CUFF is at the same
level as your heart.
6) Remain still and do not talk during the measurement.
7) Wait 2 to 3 minutes between measurements, the wait time allows the arteries to return to the condition
prior to taking the blood pressure measurement. You may need to increase the wait time depending on