19
EN
MANUALE_SP3600_BWT-A5 - Rev: 01/2020
b. was repaired, maintained or tampered with by
unauthorised personnel;
c. was repaired with non-original parts. Should
the product compliance defect be consequent
to incorrect installation or start-up procedures,
this warranty only applies when this installation
or start-up procedure is included in the product
sales contract and performed by the dealer or
his authorised personnel.
2.2. Returns.
In the event of defects, faults and malfunctions, the
product must be returned to the deal with the com-
pleted claim report, where applicable.
2.3. General and safety warnings.
2.3.1. General warnings.
BWT ITALIA srl
continuously strives to improve
its products. We trust the user will understand the
technical modifications
BWT ITALIA srl
reserves the
right.
BWT ITALIA srl
is not liable for any damages due to
improper product use.
Carefully read and keep the user manual.
In order to increase energy savings, only use the
product when necessary.
The following paragraphs include all the instruc
tions necessary to best use the product accord-
ing to your needs and to independently perform the
cleaning and maintenance operations that this type
of product requires. The references (#) in parenthe-
ses correspond to the parts indicated in the diagram
(see Fig. 19).
Upon product receipt and/or purchase, check
packaging integrity. The product must be ac-
companied by the user manual. The user manual
must be complete.
In the event of malfunctions, consult the user manual
and, if necessary, contact specialised technicians.
Failure to observe the instructions in this user manu-
al immediately null and voids the warranty.
Respect current regulations regarding accident
prevention.
Due to the complex nature of the cases treated,
the installation, user and maintenance instruc-
tions contained in this customer manual do not seek
to examine all possible and imaginable cases of ser-
vice and maintenance. Should your require addition-
al instruction or have specific problems, please do
not hesitate to contact the distributor or the product
manufacturer directly.
2.3.2. Safety warnings.
The product is not suited for people (even chil-
dren) who suffer from physical, sensorial or
mental handicaps or people who do not have suf-
ficient experience or training unless instructed on
product use and assisted by a person in charge of
their safety. Supervise children to ensure they do not
play with the device.
The product must never be operated in the
swimming
pool
when people are present.
Do not submerge the product in water (Fig. 4).
Be sure to disconnect the
power plug
from the
power outlet
before operating on the product.
Packaging materials are not children’s toys.
Films can be hazardous and cause suffocation.
Do not drink alcoholic beverages before, after
and while swimming. Alcohol consumption may
cause drowsiness, loss of consciousness and con-
sequent drowning.
If taking drugs that induce drowsiness (i.e.: tran
quillizers, antihistamines or anticoagulants),
avoid swimming in heated
pool
s.
Prolonged immersion in hot water may cause
hyperthermia , while immersion in cold water
may cause hypothermia , with symptoms such as:
Dizziness, fainting, drowsiness, lethargy . Conse-
quences of hyperthermia and hypothermia may be:
Unawareness of imminent danger, lack of heat or
cold perception, failure to recognise the need to exit
the
pool
, physical inability to exit the
pool
, damages
to foetus for pregnant women, unconsciousness with
consequent drowning risks.
Do not use the
pool
if the product (
filter
/
pump
)
cannot be used.
In order to protect the users’ health do not use
the
pool
immediately after treating the water,
wait for a length of time compliant with the cur-
rent health regulations.
Attention to the moving parts (Fig. 5).
Attention to the
inlet
/
outlet
points because they
can trap parts of the body and/or hair and cause seri-
ous personal injuries and even death (Fig. 6).
Pumps
,
filter
s, and other equipment/compo-
nents of a
pool
filtration system can operate un
-
der pressure. If not correctly installed they can cause
serious personal injuries and even death (Fig. 7).
3.
Product
presentation.
3.1. Product scope.
Pool
pumps
have been designed to move clean
fresh water exclusively for private use.
3.2. Composition.
See Fig. 19.
4. Technical specifications and features.
See Tab. 1, Fig. 1.
The
hydraulic parts
used for the building of the
system which shall include the product modi-
fy the performance (
head
and
flowrate
) of the
product.
5. Installation.
5.1. Necessary tools.
See Fig. 8.
5.2. Storage features and conditions.
Store the product in a dry place and keep away from
the elements.