Manual EVO v.3
72 / 142
4.2- EVO series equipment
4.2.1- Operation
The EVO series equipment has an LCD screen, in which you can view and
configure all operations of the equipment. The following table shows how to
organize the configuration menu of the equipment:
Chlorinating Menu:
Chlorination menu
Main menu
% of production
Max ORP
Configuration
Super chlorination
Chlorination
Calibration of free chlorine probe
pH
Relay
pH menu
Clock
pH +/- (set point value)
Configuration menu
Probe calibration
Manual pump priming
Language
On/Off pH
Control
Cell cleaning cycle
Relay menu
Acid /Alkaline
pH min
On/Off (START/STOP)
pH max.
Time (in minutes)
pH Alarm (S)N
Programme 1
ORP min
Programme 2
ORP max
OFF Programme
Volume of swimming pool in m2
Indoor or outdoor swimming pool
Clock menu
Swimming pool cover (NO)NC
Flow switch (N)S
Clock (time setting)
When browsing through the menus, an arrow is displayed on the left hand side
which indicates the selected line.
When there is more than one line to select, the buttons
enable you to
move the arrow up or down to select the required option. The
OK
button
confirms selection.
When a value has to be adjusted, for example the time or level of chlorine, the
buttons
enable you to increase or decrease the value. Press the
OK
button to confirm the value.