Manual EVO v.3
70 / 142
4.1.3- Water flow kit (OPTIONAL)
Your BSsalt chlorinator allows to choose between two different systems to
detect the lack of water flow, in order to protect the electrolysis cell:
a)
Water sensor (already embedded in the cell):
Connect the white
cable from the cell to the
input number 5,
as shown on the following
picture:
b)
Flow Switch:
Connect the two cables from the switch to the
inputs 5
and 12
. If this system is used, just let the white cable from the cell
disconnected.
Depending on the desired method, the control board has to be configured as
follows:
a)
Water sensor:
Keep the “JUMPER1” bridge connected (as the unit
comes from the factory).
b)
Flow switch:
Remove the “JUMPER1” bridge.