I
I
I
I
I
I
-
-
U
U
S
S
E
E
R
R
T
T
I
I
P
P
S
S
A - CD ACCESS DRAWER
When drawer is closed, press “open/close” to open it: the player must
be in stop mode. Place a CD in the drawer’s receptacle. Press
”open/close”
To shut drawer. Once drawer is closed. The player in pre-play mode.
Simultaneously, the display shows number of tracks and total
duration
of CD. Press “play/pause” to start playing. It is possible to select a
specific track
B - TRACK
To rewind through track numbers: press control once and player
goes back to beginning of track. To go forward through track
numbers: press control once and player will position itself at the
beginning of next track.
C - PROGRAMMING
Can only be initiated when player is in stop mode
1- CREATING A PROGRAM :
a) to create a program , press “prog”. Display will show the message
“prog” as well as number of tracks on CD and its total duration.
b) press on one of the “track” control to bring the desired track
number on display. That number will blink on display.
c) press “prog” to memorize it.
d) use the controls(
←
/
→
) again to select the next track.
e) repeat these steps until program is complete. You can memorize
up to 16 tracks this way.
f) when last track is selected and memorized, press “prog”. The
display will then show the first selected track’s number.
2 - PLAYING THE PROGRAM
Press “play/ pause” display will show “play” and play the first track on
the program. and so on.
3 - CANCELING THE PROGRAM
To cancel the program function, set player in stop mode and press
“time”.
D - SYNCHRONIZING CD PLAYERS
To synchronize the music of 2 CD players through mixer’s
headphones
Set two players in play mode.
Monitor through headphones while controlling.
Use only the monitored CD player’s “pitch” control.
E - PITCH BEND
To synchronize the tempos of two CD players through mixer’s
headphones Set two CD players in play mode.
Monitor through headphones while controlling one source.
Use only the ‘+” and “-” on the monitored player’s “pitch bend”.
Pressing these controls may allow return to original setting’s
F - PLAY/PAUSE AND CUE
Press “play/pause” to start play. At desired position. Press
“play/pause”
to set player in pause mode, eventually to refine positioning using
search buttons.
Press “cue” to memorize position “a”, hereafter considered the
beginning of the track to be played whenever “cue” is pressed during
play in pause mode. A steady pressure on “cue” allows disc to play
as long as pressure is maintained. This is useful to control position
“a” accurately.
G - LOOP (SAMPLER)
Press “play/pause” to start play. At selected position. Press
“play/pause” to set player in
pause
mode. Eventually to refine
positioning with step by step search.
Press “cue” to memorize position “a”. Hereafter considered to be the
beginning of track starting the loop (cue-sampler) indicator lights up.
Press “play/pause” to resume playing. Press “loop” to memorize the
position “b”, hereafter considered to be the ending of the last track in
the loop.
Indicator will start blinking and player will go back and resume
playing
In the loop mode. From position “a”, creating the loop between
positions “a” from memory. By pressing “loop” again, you can
memorize a new position “b” and create a new loop.
I
I
V
V
-
-
T
T
U
U
R
R
N
N
I
I
N
N
G
G
T
T
H
H
E
E
U
U
N
N
I
I
T
T
O
O
F
F
F
F
To shut unit off. It is recommended to check if a CD is in the drawer.
Also ensure that the drawer is closed before turning on. If not. Power
unit up and shut drawers by pressing “open/close”.
V
V
-
-
P
P
R
R
E
E
C
C
A
A
U
U
T
T
I
I
O
O
N
N
S
S
A professional CD player cannot be compared to a hi-fi CD player
even if they perform similar functions. This unit’s suspension is a lot
more rigid to compensate for transportation hazards (mobile discos).
To avoid “jumping” during play (caused by very low frequency
vibrations) it is recommended to add padded stands if unit is placed
on a tabletop or to coat casing with foam if unit is mounted in a rack
that can vibrate for the same reasons. Should you encounter other
problems with your
Unit. Please refer to the following chart’s left hand column.
“Pitch” speed modifiers can add sensitivity to the tuning thresholds of
Alignments. New tuning should be performed for various frequencies
in case of frequent “err” messages on one of the displays.
1) are corrections correctly made?
2) are your amplifier and mixer properly tuned?
3) did you understand every term in this booklet?
SYMPTOMS
POSSIBLE CAUSE
CORRECTIVE ACTION
The unit does not start
Inadequate
Plug in correctly
even when ON/OFF switch is activated
Plug-in
Player won’t start
Disc is improperly positioned; or, dirty
Reposition disc with label on top or
wipe it with soft, dry cloth
No sound
Verify connections on mixer and
Eventually replace connections
amplifier
Choppy playing
Unit vibration
Stabilize unit
In “PROGRAMMING” mode, no playing
Disk is in normal “PLAY” mode
Press “STOP” and re-do program
Grounding
Bad connection between mixer and
Check sodering’s and
amplifier
wire’s quality
