1 6
Front Panel
Other Controls
Other Controls
Input and Utilities selection buttons
These four buttons select edit mode for the Input parameters
and the Minidrive Utilities screens.
Mode select buttons
Output trim controls
There are six output level trim controls on the FDS-336T and four on the FDS-334T.
These knobs perform a dual function; as rotary controls they trim the channel
output level and if pressed, they activate the edit mode for that particular Output
channel. The output level trims from -6 to +6dB and has a centre detent at 0dB.
Output trim
control
Mute buttons
Press any of the front panel
Mute
keys to toggle the channel in and out of mute.
The button will light red when the output is muted.
Mute button
STORE/ENTER and RECALL
Used to store edited Programs to a new memory location and to recall saved setups
from the internal memories.
To select a preconfigured Program press the
RECALL
button on the front panel.
From new the Minidrive does not contain any preset Programs but, if the unit has
been used before it may contain user preprogrammed setups. Use the
up/down
buttons located on the left side of the LCD screen to choose the correct Program.
Press
RECALL
again to enable the Program.
The
STORE
key is also used as an
Enter
button to confirm certain operations.
Pressing the
STORE
key when in recall mode will exit the operation and pressing
RECALL
in a store operation will achieve the same result.
If the controls appear not to function this is probably because the Lock Out function has been
applied to the unit. Check the Lock Out section in the Utilities chapter for more information.
www.audiovias.com
All manuals and user guides at all-guides.com
