INSTALLATION INSTRUCTIONS - 2
PAGE 4
706-705-1500
besafepro.com
CONTINUED
❸
From beneath, install Rubber Wire Guard
❶
(with notch
facing towards rear)
over the shank and pass the Sensor wires
through the notch to prevent pinching of wires. Install Metal
Washer
❷
and Mounting Nut
❸
onto shank. Hold Faucet in
position and wrench tighten Mounting Nut
❸
. Verify that Sensor
wires are not pinched.
❹
From beneath, install “U” Washers
❶
onto the Threaded
Mounting Posts and secure with the Mounting Nuts
❷
. Ensure
that the “U” Washers
❶
are perpendicular to the wall surface for
added leverage and wrench-tighten.
Adjustable
Wrench
You can mount your Solenoid Box directly to the shank of the
Faucet or use the included Flex Hose and secure the Solenoid Box
onto the wall for more flexibility.
For
Direct Connection
, please refer to
Option 1
.
For
Flex Hose Connection
, please refer to
Option 2
.
Either of the above connection methods will have no impact on
the performance of the SF390.
Adjustable
Wrench
TOWARDS
REAR
