Real Freedom | Receiver Product Manual
28 of 51
System time and date
You can set the system time and date.
From the main menu, select
Settings
, then select
Time & Date
and configure as follows.
Table 15: System time and date
Setting
Description
System Time
Sets the system time.
System Date
Sets the system date.
Tallies
A tally is a signal sent from the production workflow to the camera indicating that the camera is ‘live’. This
normally displays as a red or green light on the camera to show the presenter that the camera is live and in
the camera viewfinder to alert the camera operator. These signals are connected to the DB9 connector
(SIGNALLING) on the rear of the receiver. When the tally signal is activated, a red or green (or both) bar
app
ears on the receiver’s screen. This signal is also passed on to the camera via the camera control link.
From the main menu, select
Settings
, then select
Tallies
and configure according to your requirements.
Table 16: Tallies
Setting
Description
Input Tallies
Choose the option required by the production workflow.
Output DB9 Pins
The DB9 connector is used for tally inputs, RS232 control (for example,
BSI PTRZ joystick) and some auxiliary I/O for special user requirements.
Choose the required logic for the connector.
pinout.
