Real Freedom | Receiver Product Manual
11 of 51
Receiver rear panel
The rear panel of the receiver provides access to the RF inputs, video and audio ports, camera control and
power connections.
Figure 6: Receiver rear panel
Key
Component
Description
1
SIGNALLING
Provides RS232 control, dry red and green tally closure, and
auxiliary controls to client equipment via a DB9 connector.
Also allows the connection of BSI accessories, for example,
a PTRZ joystick.
Connector: 9-pin D-sub (F)
2
AES AUDIO
Provides balanced mono audio output, which is less
susceptible to noise and interference. Note that balanced
AES has a shorter transmission distance (up to 150 m) than
the
unbalanced version over coaxial cable.
Connector
:
3-pin XLR (M)
3
ANALOG AUDIO (L)
Provides analog stereo audio output to client-supplied
equipment.
Connector: 3-pin XLR (M)
4
ANALOG AUDIO (R)
5
10
–36V 10 A
Use to connect the receiver to a DC power source.
Connector: 4-pin XLR (M)
6
FUSE 10A T10AH250V
Fuse for the DC power supply system.
7
MAINS 100
–240VAC 50–60Hz 5A
FUSE 5A T5AH250V
Use to connect the receiver to an AC power supply.
Connector: IEC
Fuse for the AC power supply system.
8
Earth stud
Use to connect the receiver to the equipment rack or some
other kind of electrical ground.
9
CONTROL/IP VIDEO
Camera control. Use to connect the receiver to a camera
control panel either directly or via a network switch.
Or use to stream or receive IP video through an Ethernet
network connection.
Connector: RJ45
