Bryant 559F, Installation, Start-Up And Service Instructions Manual

Page: 4 / 32

POWER EXHAUST/
BAROMETRIC RELIEF
(ACCESSORY ONLY)
UNIT
STD UNIT
WEIGHT
ECONOMIZER
WEIGHT
CORNER
A
CORNER
B
CORNER
C
CORNER
D
DIM A DIM B DIM C
Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg ft-in. mm ft-in. mm ft-in. mm
559F180 1550 703 110 50 391 177 365 166 384 174 410 186 3-5 1041 3-6 1067 1-10 559
559F216 1650 748 110 50 399 181 384 174 402 182 439 199 3-4 1016 3-6 1067 1- 8 508
NOTES:
1. Refer to print for roof curb accessory dimensions.
2. Dimensions in (
) are in millimeters.
3. Center of Gravity.
4. Direction of airflow.
5. Ductwork to be attached to accessory roof curb only.
6. Minimum clearance:
• Rear: 7
8
-0
9
(2134) for coil removal. This dimension can be reduced to 4
8
-0
9
(1219)
if conditions permit coil removal from the top.
• Left side: 4
8
-0
9
(1219) for proper condenser coil airflow.
• Front: 4
8
-0
9
(1219) for control box access.
• Right side: 4
8
-0
9
(1219) for proper operation of damper and power exhaust if so
equipped.
• Top: 6
8
-0
9
(1829) to assure proper condenser fan operation.
• Local codes or jurisdiction may prevail.
7. With the exception of clearance for the condenser coil and the damper/power ex-
haust as stated in Note #6, a removable fence or barricade requires no
clearance.
8. Dimensions are from outside of corner post. Allow 0
8
- 5 ⁄
16
9
(8) on each side for top
cover drip edge.
Fig. 4 — Base Unit Dimensions, 559F180 and 216
—4—