4.
Drill the holes (Ø 6 mm) according to the marks and insert the wall plugs (10)
into the holes as shown in figure 4. Use the rubber washers (9) and the
ST4x30 screws (8) to fix the wall profiles (6) to the wall. Press the screw caps
(7) over the screws as shown in figure 5.
8
Figure 5
5.
Install the handle (12) on the pivot door (11) as shown in figure 6 left.
6.
Erect the pivot door (11) carefully, insert the lower pivot part (15) into the
bottom rail profile (1). Hold the door vertically, insert the pivot part (15) into
the frame then assemble the rest of the pivot as shown in figure 6.
7.
Loosen the screws in the top and bottom pivot hinges (15), align the door to
ensure a smooth opening, with a watertight seal when closed. Once this has
been achieved, tighten the screws.
Fi g. 6
Figure 6
17