Installation instructions
Reflex pivot door 800/900 with side panel 800/900
Adjustable range 611801: (770 - 810) x (770 - 810) x 1850 mm
Adjustable range 611802: (870 - 910) x (870 - 910) x 1850 mm
Adjustable range 611806: (785 - 805) x (785 - 805) x 1850 mm
Adjustable range 611807: (885- 905) x (885 - 905) x 1850 mm
Mounting preparation
The pivot door 800/900 is mountable both left hand and right hand. In these
installation instructions the description is based on a door pivoting on the right
side. After opening the packaging, read the instructions carefully. Check whether
all parts are present and there are no signs of shipping damage. If you find any
problems, please contact your retailer directly.
Necessary tools: electric drill, masonry drill (Ø 6 mm), drill (Ø 3.2 mm), crosstip
screw driver, spirit level, tape measure, pencil and silicone sealant.
Packing list
1.
Rail profile 2x
2.
Decorative strip horizontal 2x
3.
Anti-water strip vertical 2x
4.
Fixed profile pivoting side 1x
5.
ST4x30 screw 8x
6.
Pivot door wall profile 1x
7.
Screw cap 8x
8.
ST4x30 screw 8x
9.
Rubber washer 8x
10.
Wall plug 8x
11.
Pivot door 1x
12.
Handle 1x
13.
ST4x10 screw 6x
(incl. screw cap, washer)
14.
Decorative strip
vertical 2x
15.
Pivot part 2x
16.
Anti-water strip
horizontal 1x
17.
Fixed profile 1x
18.
ST4x16 screw 4x
19.
Connection profile 1x
20.
Side panel 1x
21.
Sidepanel wall profile 1x
10